JNS Integrated Selective Soldering

Model	JNS-450
Parameters
Dimension L×W×H	2600×1800×1650mm（1-2 pot）
Transporting System
PCB Width	60-450mm
PCB Length	120-500mm
PCB Top Space	Max ：120mm
PCB Bottom Space	Max ：50mm
PCB Edge Size	4mm
Conveyor Height	900±20
Conveying Speed	0.2-10m/min
PCB Weight	Max:5kg
Fluxer Module
Flux Capacity	2L
The Size of Flux Nozzle Tube	130um
Flux Width	2-8mm
Preheating Module
Bottom movable Infrared Heater	Max:14kw
Temperature Range	Room Temperature-250℃
Top Air Heater	Max：6kw
Soldering Module
Min Diameter of Solder Nozzle	¢2/4.5
Wave Height	3〜5mm
Solder Pot Capacity	8KG（Solenoid Pump）/13KG（Mechanical Pump）
Soldering Temperature	Max：350℃
Heating Time	40min/(Mechanical Pump 300℃）/75min/(Solenoid Pump 300℃）
Pot Heating Power	1KW/ Single pot
Location Speed	X/Y：2-200mm/s
Temp.Control Accuraey	±2℃
Soldering Accuracy	±0.25mm
Control System
PC Operating System	Windows 10
Process Visualization	CCD Visual
Software Language	Chinese and English Changeable
Programming Mode	Inline/Off line Programming
Data Import	Gerber、ImageꢀIntroduction
Air System
Air Supply	N2/O2
Required Pressure	0.4-0.8Mpa
N2 Consumption	Eachꢀconsumesꢀaboutꢀ1.5-2ꢀm³/h
N2 Concentration	≥99.999%
Electrical Parameter
Power Supply	AC 380VAC 3Φ5W 50/60Hz
Consumption	35KW
Air Exhaust
Air Duct Diameter	¢200mm x3
Exhaust Air Rate	360 m³/h
The above contents are subject to change without further notice!