| Parameters | Smartcell-400 |
| Dimension（L×W×H） | 1650×1800×1650mm |
| Transporting System | |
| PCB Width | 60-400 mm |
| PCB Length | 120-400 mm |
| PCB Top Side Clearance | Max.120 mm |
| PCB Bottom Side Clearance | Min.50 mm |
| PCB Edge Clearance | 4 mm |
| Conveyor Height | 900±20 |
| Conveying speed | 0.2-10M/min |
| Pallet/PCB weight | Max:5kg |
| Flux Module | |
| Flux Capacity | 2L |
| The Size of Flux Nozzle Tube | 130um（Double Nozzle is option） |
| Flux Width | 2-8mm |
| Preheat Module | |
| Bottom Dynamic Infrared Heater | Max: 9KW |
| Temperature Range | RT~250℃ |
| Top Air Heater | Max：6KW |
| Temp. Control Accuracy | ±15℃ |
| Soldering Module | |
| Min Diameter of Solder Nozzle | ¢3/5 |
| Wave Height | 5mm |
| Solder Pot Capacity | 8KG/pot |
| Soldering Temperature | Max ：350 ℃ |
| Heating Time | 40min/(300℃） |
| Pot Heating Power | 1KW/Single pot |
| Location Speed | X/Y：2-200mm/s Z：2-50mm/s |
| Soldering Accuracy | ±0.25mm |
| Control System | |
| PC Operating System | Windows10 |
| Process Visualization | CCD Visual |
| Software Language | Chinese and English Changeable |
| Data Import | Gerber、Image Import |
| Programming Mode | Inline/Offline Programming |
| Electrical Parameter | |
| Power Supply | AC,380VAC 3Φ 5W 50/60Hz |
| Consumption | 22KW |
| Air Exhaust | |
| Air Duct Diameter | ¢150mm |
| Exhaus Air Rate | 360 M³/h |
| N2 Technology | |
| Pressure | 0.4-0.8 Mpa |
| N2 Consumption | Each consumes about 1.5~2 M³/h |
| Concentration | ≥99.999% |
| The above contents are subject to change without further notice! | |
Mini- Selective Wave Soldering System
● The soldering for double-side PCB can be applied automatically
● Offline programming function/ Gerber file can be applicable
● Without any initial PCB data, the figure can be loaded quickly with simple & fast graphic programming; Selective flux spraying can control the flux processing accurately as well as keeping the clear surface of PCB with extremely low flux consumption
● The temperature controls for top and bottom preheating is independent. Infrared heating can improve heating efficiency and keep temperature uniformity
● Transmission speed of wave nozzle is adjustable. Online rail-time wave height monitoring and auto calibration function
● Adopted CCD camera to monitor solder processing, the soldering quality can betraced in whole processing
Share to:
FEATURED PRODUCTS
Reflow Oven Price
Smt Reflow Oven Price
Reflow Oven Manufacturer
Vacuum reflow oven
Solder Joint and Component Inspection AOI JTA D100
Benchtop Reflow Oven
Smtmax As 5060 Reflow Oven
Smt Vacuum Reflow Oven
Smt Reflow Oven