MFO Series Lead-Free Hot Air Reflow Oven

● Reinforced main hanging bracket to avoid rail deformation and board jamming;
● Multi-layer thermal insulation design. The Surface temperature of the Oven body is reduced by10 to 20 degrees, reducing the temperature of the working environment effectively;
● New cooling configuration to make the filteredor reclaimed air back to oven chamber, it can reduce the thermal loss as well as get better flux collection;
● 15% heat transferring efficiency was improved to deal with the lead free process with morecomplicated and larger products;
● The dual-rails conveyor is able to improve the production efficiency as well as save power andcost;
● Use the full protection of the sealed oven design to prevent nitrogen losing. So the lowestconcentration of oxygen can be reached to 150ppm;
● Nitrogen consumption is only 20-22M /H with the oxygen level 300-800ppm ;
● Nitrogen construction is option: High precision & reliable Oxygen analyzer +Cooling Water,Reduce the solder, avoid bridging, get good welding quality.

Share to:

Model No MFO-800/MFO-800-N
Heated Length 3110mm
Dimensions (L×W×H) 5520 x 1430 x 1530mm
Net Weight Approx. 2400KG /2500KG
Exhaust Volume 10 m³/min×2 Exhausts
Source Power AC 380V3Φ5w 50/60Hz(optional AC220V3Φ) 
Power Starting: 30KW/32KW
Operating: 9KW/10KW
Heat up Time Approx.  25min
Temp. Range Room temperature -300°C
Max. Width of PCB 400mm( Option: 460mm )
Component Height Top 30mm/Bottom 25mm
Conveyor Direction Left to Right( Option:Right to Left )
Fixed Rail Side Front Rail Fixed(Option:Rear Rail Fixed )
Conveyor Height 900±20 mm
Conveyor Speed Range 300-2000mm/min
Data Storage Various prameters and status are storable
Abnormal Alarm Abnormal Temp. (Over/under Heat.) Sound & light
Device Layout
No.of heating zones Top 8, Bottom 8
No.of cooling zones Top 3, Bottom 3
Control System WIN10+Computer+PLC
Temp. Control Method PID+SSR
Thermocouple Wire 4 wires
Conveyor System Rail+ Mesh
Conveyor Control Mode Inverter+Import Conveyor Motor
Chain Structure Dual-link Avoid Block
Width Adjustment Electric Adjustable
Cover Open Way Electric open for easy maintenance.
UPS Power Backup power supply to ensure PCB production finish normally.
Cooling System  Forced Air Cooling
Other Extend Models JTR-800D /JTR-800D-N
JTR-800L/JTR-800L-N
Dimensions (L×W×H) 5520 x 1660 x 1530mm
Net Weight Approx.  2750KG /2850KG Approx.  2700KG /2800KG
Heat up Time Approx.  30min
Range of Rail Width “-D”Model: adjustable 50-270mm; For “-L” Model: adjustable 50-610mm
For -N Model -N:Nitrogen
Nitrogen Consumption 300-1000PPM at 20m³/hr (standard) / 500-1000PPM at 25-30m³/hr (“-D” or “-L” models) 
The above contents are subject to change without further notice!

MFO-1000/MFO-1000-N

Model No MFO-1000/MFO-1000-N
Heated Length 3890mm
Dimensions (L×W×H) 6300 x 1430 x 1530mm
Net Weight Approx. 2700KG /2800KG
Exhaust Volume 10 m³/min×2 Exhausts
Source Power AC 380V3Φ5w 50/60Hz(optional AC220V3Φ) 
Power Starting: 36KW/38KW
Operating: 10KW/11KW
Heat up Time Approx.  25min
Temp. Range Room temperature -300°C
Max. Width of PCB 400mm( Option: 460mm )
Component Height Top 30mm/Bottom 25mm
Conveyor Direction Left to Right( Option:Right to Left )
Fixed Rail Side Front Rail Fixed(Option:Rear Rail Fixed )
Conveyor Height 900±20 mm
Conveyor Speed Range 300-2000mm/min
Data Storage Various prameters and status are storable
Abnormal Alarm Abnormal Temp. (Over/under Heat.) Sound & light
Device Layout
No.of heating zones Top 10, Bottom 10
No.of cooling zones Top 3, Bottom 3
Control System WIN10+Computer+PLC
Temp. Control Method PID+SSR
Thermocouple Wire 4 wires
Conveyor System Rail+ Mesh
Conveyor Control Mode Inverter+Import Conveyor Motor
Chain Structure Dual-link Avoid Block
Width Adjustment Electric Adjustable
Cover Open Way Electric open for easy maintenance.
UPS Power Backup power supply to ensure PCB production finish normally.
Cooling System  Forced Air Cooling
Other Extend Models JTR-1000D /JTR-1000D-N
JTR-1000L/JTR-1000L-N
Dimensions (L×W×H) 6300 x 1660x 1530mm
Net Weight Approx.  3050KG /3150KG Approx.  3000KG /3100KG
Heat up Time Approx.  30min
Range of Rail Width “-D”Model: adjustable 50-270mm; For “-L” Model: adjustable 50-610mm
For -N Model -N:Nitrogen
Nitrogen Consumption 300-1000PPM at 20m³/hr (standard) / 500-1000PPM at 25-30m³/hr (“-D” or “-L” models) 
The above contents are subject to change without further notice!

MFO-1200/MFO-1200-N

<table style=”width: 951px;” width=”829″>
<tbody>
<tr>
<td style=”width: 378.011px;” width=”217″>Model No</td>
<td style=”width: 566.023px;” width=”203″>MFO-1200/MFO-1200-N</td>
</tr>
<tr>
<td style=”width: 378.011px;”>Heated&nbsp;Length</td>
<td style=”width: 566.023px;” width=”203″>4640mm</td>
</tr>
<tr>
<td style=”width: 378.011px;”>Dimensions (L&times;W&times;H)</td>
<td style=”width: 566.023px;” width=”203″>7050&nbsp;x&nbsp;1430&nbsp;x&nbsp;1530mm</td>
</tr>
<tr>
<td style=”width: 378.011px;”>Net Weight</td>
<td style=”width: 566.023px;” width=”203″>Approx.&nbsp;3000KG/3100KG</td>
</tr>
<tr>
<td style=”width: 378.011px;”>Exhaust Volume</td>
<td style=”width: 566.023px;” width=”612″>10 m&sup3;/min&times;2&nbsp;Exhausts</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Source&nbsp;Power</td>
<td style=”width: 566.023px;” width=”612″>AC&nbsp;380V3&Phi;5w 50/60Hz(optional&nbsp;AC220V3&Phi;)&nbsp;</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Power</td>
<td style=”width: 566.023px;” width=”203″>Starting:&nbsp;40KW/42KW <br />Operating:&nbsp;11KW/12KW</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Heat&nbsp;up&nbsp;Time</td>
<td style=”width: 566.023px;” width=”612″>Approx.&nbsp;&nbsp;25min</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Temp.&nbsp;Range</td>
<td style=”width: 566.023px;” width=”612″>Room&nbsp;temperature&nbsp;-300&deg;C</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Max.&nbsp;Width&nbsp;of&nbsp;PCB</td>
<td style=”width: 566.023px;” width=”612″>400mm( Option:&nbsp;460mm )</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Component&nbsp;Height</td>
<td style=”width: 566.023px;” width=”612″>Top&nbsp;30mm/Bottom&nbsp;25mm</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Conveyor&nbsp;Direction</td>
<td style=”width: 566.023px;” width=”612″>Left&nbsp;to&nbsp;Right( Option:Right&nbsp;to&nbsp;Left )</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Fixed&nbsp;Rail&nbsp;Side</td>
<td style=”width: 566.023px;” width=”612″>Front&nbsp;Rail&nbsp;Fixed(Option:Rear&nbsp;Rail&nbsp;Fixed )</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Conveyor&nbsp;Height</td>
<td style=”width: 566.023px;” width=”612″>900&plusmn;20&nbsp;mm</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Conveyor&nbsp;Speed&nbsp;Range</td>
<td style=”width: 566.023px;” width=”612″>300-2000mm/min</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Data&nbsp;Storage</td>
<td style=”width: 566.023px;” width=”612″>Various&nbsp;prameters&nbsp;and&nbsp;status&nbsp;are&nbsp;storable</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Abnormal&nbsp;Alarm</td>
<td style=”width: 566.023px;” width=”612″>Abnormal&nbsp;Temp.&nbsp;(Over/under&nbsp;Heat.)&nbsp;Sound &amp; light</td>
</tr>
<tr>
<td style=”width: 944.034px;” colspan=”2″ width=”829″>Device&nbsp;Layout</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>No.of&nbsp;heating&nbsp;zones</td>
<td style=”width: 566.023px;” width=”203″>Top&nbsp;12,&nbsp;Bottom&nbsp;12</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>No.of&nbsp;cooling&nbsp;zones</td>
<td style=”width: 566.023px;” width=”612″>Top&nbsp;3,&nbsp;Bottom&nbsp;3</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Control&nbsp;System</td>
<td style=”width: 566.023px;” width=”612″>WIN10+Computer+PLC</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Temp.&nbsp;Control&nbsp;Method</td>
<td style=”width: 566.023px;” width=”612″>PID+SSR</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Thermocouple&nbsp;Wire</td>
<td style=”width: 566.023px;” width=”612″>4&nbsp;wires</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Conveyor&nbsp;System</td>
<td style=”width: 566.023px;” width=”612″>Rail+&nbsp;Mesh</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Conveyor&nbsp;Control&nbsp;Mode</td>
<td style=”width: 566.023px;” width=”612″>Inverter+Import&nbsp;Conveyor&nbsp;Motor</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Chain&nbsp;Structure</td>
<td style=”width: 566.023px;” width=”612″>Dual-link&nbsp;Avoid&nbsp;Block</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Width&nbsp;Adjustment</td>
<td style=”width: 566.023px;” width=”612″>Electric&nbsp;Adjustable</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Cover&nbsp;Open&nbsp;Way</td>
<td style=”width: 566.023px;” width=”612″>Electric&nbsp;open&nbsp;for&nbsp;easy&nbsp;maintenance.</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>UPS&nbsp;Power</td>
<td style=”width: 566.023px;” width=”612″>Backup&nbsp;power&nbsp;supply&nbsp;to&nbsp;ensure&nbsp;PCB&nbsp;production&nbsp;finish&nbsp;normally.</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Cooling&nbsp;System</td>
<td style=”width: 566.023px;” width=”612″>&nbsp;Forced&nbsp;Air&nbsp;Cooling</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Other&nbsp;Extend&nbsp;Models</td>
<td style=”width: 566.023px;” width=”203″>JTR-1200D&nbsp;/JTR-1200D-N <br />JTR-1200L/JTR-1200L-N</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Dimensions (L&times;W&times;H)</td>
<td style=”width: 566.023px;” width=”203″>7050&nbsp;x&nbsp;1660&nbsp;x&nbsp;1530mm</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Net&nbsp;Weight</td>
<td style=”width: 566.023px;” width=”203″>Approx.&nbsp;&nbsp;3350KG&nbsp;/3450KG Approx.&nbsp;&nbsp;3300KG&nbsp;/3400KG</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Heat&nbsp;up&nbsp;Time</td>
<td style=”width: 566.023px;” width=”612″>Approx.&nbsp;&nbsp;30min</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Range&nbsp;of&nbsp;Rail&nbsp;Width</td>
<td style=”width: 566.023px;” width=”612″>&ldquo;-D&rdquo;Model:&nbsp;adjustable&nbsp;50-270mm;&nbsp;For&nbsp;”-L”&nbsp;Model:&nbsp;adjustable&nbsp;50-610mm</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>For&nbsp;-N&nbsp;Model</td>
<td style=”width: 566.023px;” width=”612″>-N:Nitrogen</td>
</tr>
<tr>
<td style=”width: 378.011px;” width=”217″>Nitrogen&nbsp;Consumption</td>
<td style=”width: 566.023px;” width=”612″>300-1000PPM&nbsp;at&nbsp;20m&sup3;/hr&nbsp;(standard)&nbsp;/&nbsp;500-1000PPM&nbsp;at&nbsp;25-30m&sup3;/hr&nbsp;(&ldquo;-D”&nbsp;or&nbsp;”-L”&nbsp;models)&nbsp;</td>
</tr>
<tr>
<td style=”width: 944.034px;” colspan=”2″ width=”829″>The&nbsp;above&nbsp;contents&nbsp;are&nbsp;subject&nbsp;to&nbsp;change&nbsp;without&nbsp;further&nbsp;notice!</td>
</tr>
</tbody>
</table>

Download

JTR Series Lead Free Hot Air Reflow Oven

FEATURED PRODUCTS

Scroll to Top

Get Free Quote