Solder paste inspection is a critical quality control process in SMT manufacturing that verifies the accuracy of solder paste deposition before component placement. Using advanced 3D optical measurement systems, SPI machines analyze paste volume, height, area, and alignment with micron-level precision (typically ±5μm). These systems detect defects like insufficient paste, bridging, or misalignment that could cause soldering failures. Modern SPI solutions integrate with stencil printers for real-time process correction, reducing rework rates by up to 90%. By catching defects early, SPI significantly improves first-pass yield, especially for fine-pitch components (down to 01005 size) and high-density interconnects. This non-contact inspection method has become essential for automotive, medical, and aerospace electronics manufacturing.
| Model | REFINE-XS |
| Inspection Module | |
| Camera Specification | 5M High-frequency Industrial Camera, High Frame Number (Factory Setting); 12M Option |
| Pixel | 20μm, 15μmꢀ(Factory Setting) |
| FOV(single field of view) Range | 40×40 mm, 30×30 mm (Factory Setting) |
| LED | RGB + TOP |
| Light Source | 0 – 550 μm |
| Height Inspection Resolution | 0.36 μm |
| Height Inspection Accuracy | 1μm (Based on the actual solder paste/calibration block) |
| Inspection Item | Volume, Area, Height, X/Y Position, Bridging, Shape, etc |
| Defective Type | Excessive/Insufficient/Missing paste,Bridge,2D & 3D Paste displacement, Shape deformity, Dust, etc |
| Repeatability (Volume, Area, Height) | <1% @3sigma |
| GR & R (Gauge Reproducebility and Repeatability) | < 10% (@6sigma tolerance = +/- 50%) |
| Inspection Speed | 0.35Sec / FOV |
| Conveyor & PCB Size | |
| Max PCB Size | 460×410 mm |
| Min PCB Size | 50×50 mm |
| PCB Up-Clearance | 30 mm |
| PCB Bottom-Clearance | 30 mm |
| PCB Thickness | 0.5-5 mm |
| Max PCB Warpage | ±3 mm |
| PCB Transfer Height | 2.5mm |
| PCB Transfer Height | 900±20 mm |
| Max PCB Weight | 5KG |
| Frame & Others | |
| Base & Frame | Integra1 steel casmting frame; firmly, ensure high accuracy of inspection |
| Dimensions and Weight | 947x1321x1600mm (W x D x H) 950KG |
| Power Supply | AC 220V 1Φ 50/60Hz |
| Power | 2.2KW |
| Communication Interface | SMEMA |
| Air Supply | 4-6bar，5L/min |
| Operating Condition | 5-40℃, 15-90% RH |
| Options | |
| 1. BarcodeReader | 4. Repair Station (PC) |
| 2. 3D Calibration Target | 5. Infared Muti-touch LCD + Voice Control |
| 3. 2D Calibration Glass | 6. Offline Editing Software (License Key) |
| The above contents are subject to change without further notice! | |
